Filament Wound Fiberglass Tube
Min ID: 20mm
Max ID: 400mm
Thickness: 50mm or Custom
Clear Coat: Matte/Glossy
Max Length: Up to 6000mm
OD Tolerance: Premium +/-0.05
Mirror Inner Surface: Possible
Layup Angle: +/-15,45,75 Degree or Custom
Smooth Mirror Like Inner Surface
Future is good at making smooth inner surface filament tubes, by special treatment for the mandrel.
-OD Tolerance: +/-0.05mm
-Length Tolerance: +/-0.1mm
-45 Degree Edge Cutting: Possible
To satisfy your demand for the cylinder piston movement inside the tube for watermakers for boats with Clark pump.
What is Filament Wound Fiberglass Tube
Fiberglass filament wound tubes are fabricated by wounding fiberglass filaments and epoxy resin around a mandrel (similar to roll wrapping carbon tubing), and then curing them in the oven to get a rigid carbon tubes.
The layup angle and number of layers can be controlled by computer to meet different pressure levels. Due to the light weight, corrosion resistance and non-conductive properties of glass fiber, it is widely used in water diversion, pipeline transportation and seawater desalination.